Home
BYTEFLASHER SOFTWARE
Mobile App
Simplifies the BMW tuning process, providing powerful features with an intuitive, user-friendly interface
- Stage 1 & Stage 2 performance tunes
- Engine speed (idle & max rev)
- Sport throttle response
- Delete max vehicle speed
- Launch control*
- Delete cold start*
- Dyno speed limiter*
- Enable SMG shift lights*
- Sport mode memory*
- Burble tuning
- Flashing/reading DME
- Flash counter reset*
- Read/clear engine error codes
- Clear engine adaptations
- And more!
* Select vehicles only, contact us for more info
BYTEFLASHER HARDWARE
Wireless Adapter
Packed with advanced features, delivering unmatched performance
- 32-bit, dual-core, 240MHz microprocessor
- 32MB flash memory
- Stores multiple tunes
- Fully wireless communication (BLE coming soon)
- Supports K-Line & CAN protocols
- Battery voltage measurements
- Intelligent voltage calibration
- OTA firmware updates
- Smallest form-factor available
- Designed in the USA
SERIOUSLY?
Another Adapter?
Why do I need this adapter when I already have others?
Unlike conventional adapters, ours doesn’t rely on your mobile device’s hardware to get the job done. With onboard processing, it delivers fast, consistent performance no matter the device or connection quality. You could even turn your device completely off in the middle of the flashing process! Try that with your collection of existing adapters and cables! Elevate your tuning experience with a solution that’s built for performance and peace of mind.
INTUITIVE
Built for Enthusiasts
No tuning expertise? Dyno sessions too costly? Relax, ByteFlasher simplifies it all!
Creating a high-performance tune involves adjusting dozens of intricate parameters, a task that typically requires deep expertise, countless hours of fine-tuning, and costly dyno sessions. With ByteFlasher, we take the guesswork and complexity out of the equation, empowering you to achieve professional-grade results with ease. Our intuitive platform puts advanced tuning capabilities right at your fingertips, making expert-level tuning accessible to all enthusiasts—no stress, no hassle, just performance.
ADAPTIVE
Customizable Performance
Easily adapt your tune to match your vehicle's upgrades and your changing needs.
Unlike canned tunes that lock you into a single setup, ByteFlasher gives you the freedom to adapt your engine tuning as your vehicle evolves or as your driving preferences change. Whether you’re adding aftermarket parts or simply seeking a different driving experience, you can easily adjust your tune without the need to purchase a new one each time. This flexibility ensures your BMW always performs exactly how you want, whenever you want.
FROM BUYERS
Reviews
ByteFlasher
Original price was: $399.99.$349.99Current price is: $349.99.
ByteFlasher is reshaping the future of BMW engine tuning with cutting-edge technology and unparalleled performance enhancements. Get ready to transform your driving experience with the ByteFlasher mobile app and wireless adapter!
Support for more vehicles/DMEs coming soon!
- Description
- Additional information
- Reviews (0)
Description
ByteFlasher – BMW Tuning Software
Welcome to ByteFlasher, where engine tuning is redefined.
ByteFlasher is reshaping the future of BMW engine tuning with cutting-edge technology and unparalleled performance enhancements. Get ready to transform your driving experience with the ByteFlasher mobile app and wireless adapter!
- Unleash Hidden Power: Our state-of-the-art algorithms and precision hardware engineering empower you to unlock the full potential of your BMW’s engine. Experience increased horsepower, enhanced torque, and optimized fuel efficiency like never before.
- Intuitive User Experience: With our user-friendly mobile app, tuning your BMW has never been easier. Simply connect, select your desired tuning settings, and watch as ByteFlasher optimizes your vehicle’s performance.
- Data-Driven Performance: Every tweak and adjustment made through ByteFlasher is backed by meticulous data analysis and testing, ensuring that your BMW performs at its peak under all driving conditions.
- Security and Reliability: We prioritize your vehicle’s safety and reliability. ByteFlasher adheres to industry-leading security protocols, guaranteeing a seamless and secure tuning experience.
Features
ByteFlasher App
- Stage 1 & Stage 2 performance tunes
- Engine speed (idle & max rev)
- Sport throttle response
- Delete max vehicle speed
- Launch control
- Delete cold start*
- Dyno speed limiter*
- Enable SMG shift lights*
- Sport mode memory*
- Burble tuning
- Flashing/reading DME
- Flash counter reset*
- Read/clear engine error codes
- Clear engine adaptations
- And more!
* Select vehicles only
ByteFlasher Wireless Adapter
- 32-bit, dual-core, 240MHz microprocessor
- 32MB flash memory
- Fully wireless communication (BLE coming soon)
- Supports all OBD2 communication protocols
- Battery voltage measurements
- OTA firmware updates
- Designed in the USA
- Small form-factor
Supported Vehicles
2001-2006 BMW E46 M3
- MSS54
- MSS54HP
1998-2003 BMW E39 M5
- MSS52
More coming soon!
Proudly Designed & Engineered in the USA
We take great pride in the fact that the ByteFlasher wireless adapter was designed, developed, and prototyped entirely in the USA, using the best American resources. Our engineering team adhered to the highest standards of quality and precision, ensuring that every aspect of our product reflects the excellence of American engineering. By keeping these crucial stages of development in-house, we’ve maintained complete control over the performance, reliability, and durability of our product, setting a new benchmark in the BMW tuning aftermarket.
While our design and development are proudly rooted in the USA, we leverage global manufacturing facilities to bring our products to life. This approach allows us to maintain our rigorous quality standards while benefiting from the efficiency and cost-effectiveness of global production capabilities. By combining the best of American design with top-tier international manufacturing, we can offer our customers a product that excels in both performance and value, ensuring that our solutions remain competitive in the market without compromising on quality.
In addition to our hardware, our software was also fully developed in-house using the latest advancements in mobile and IoT technology. By keeping the development process internal, we ensured that every detail of the software was meticulously crafted, tested, and perfected by our team. This hands-on approach allows us to maintain complete control over the user experience and performance, delivering an app that seamlessly integrates with our wireless adapter and meets the high expectations of BMW enthusiasts. Our commitment to in-house development underscores our dedication to quality and innovation in every aspect of our product.
Satisfaction guarantee
We are committed to providing you with top-quality products and outstanding customer service. ByteFlasher is designed to give you unparalleled control over your BMW’s performance. To ensure your complete satisfaction, we offer a 14-day return policy on all purchases.
If for any reason you are not fully satisfied with ByteFlasher, you can request a return within 14 days of your purchase date. Simply contact our customer support team, and we will guide you through the return process. Upon receiving your return request, we will provide instructions on how to return the ByteFlasher wireless adapter. Once we receive the returned adapter, we will process your refund promptly. Our goal is to ensure you have a positive experience with our products and services, and we are here to assist you every step of the way.
FAQs
What mobile devices are supported?
For now, only Android is supported, but we are finalizing our iOS app.
Do I need to have an internet connection on my mobile device?
Yes, the mobile app requires you to login periodically. It also checks for software updates as needed.
Do I need to near a Wi-Fi router to tune?
If your mobile device has an active SIM card, then no. If your mobile device requires a Wi-Fi connection to access the internet, then yes.
Is Bluetooth supported?
Not yet, but this is on our roadmap as a future feature.
Is a battery charger required?
It is highly recommended to have a battery charger for the first flash which could take several minutes. After the first flash, however, flashes are much faster and a charger is generally not necessary.
Do I need to remove my DME?
No, everything is done via the OBD2 port.
Do I need a computer to tune?
No, you only need a mobile device and the ByteFlasher wireless adapter to tune.
Can I leave the adapter connected while driving?
Yes, but we do not recommend leaving it connected long-term due to the slight draw on the battery.
Can I tune more than one vehicle?
Each vehicle license allows you to tune one vehicle indefinitely. If you want to tune additional vehicles, you’ll need to purchase additional vehicle licenses. You only need to purchase a single ByteTuner wireless adapter though as you can store multiple vehicle licenses on the adapter.
Can I tune more than one vehicle with my account?
Yes, assuming you’ve purchased additional vehicle licenses. Your account can be linked with any number of vehicle licenses.
Can I transfer my license to another person?
Vehicle licenses are currently non-transferable.
What should I do if my flash failed?
This happens on rare occasion, but typically the DME can be recovered by flashing again. Temporarily disconnect the battery for a few minutes. You can then attempt to start the flashing process again.
How do I get support?
Email info@renovelo.com and someone from our support staff can help you.
Additional information
| DME Type | MS41.1, MS41.2, MS42, MS43, MS45.0, MS45.1, MSS52, MSS54, MSS54HP |
|---|
Only logged in customers who have purchased this product may leave a review.
BYTEFLASHER MOBILE APP
Download
Download the ByteFlasher mobile app for free!
OBD2 BMW
Supported Vehicles
2001-2006 BMW E46 M3
MSS54 | MSS54HP
1998-2003 BMW E39 M5
MSS52
More coming soon!
SIMPLE & EASY
Getting Started
Login
Plug
Connect
License
Read
Tune
QUALITY ENGINEERING
Designed in USA
We take great pride in the fact that the ByteFlasher wireless adapter was designed, developed, and prototyped entirely in the USA, using the best American resources. Our engineering team adhered to the highest standards of quality and precision, ensuring that every aspect of our product reflects the excellence of American engineering. By keeping these crucial stages of development in-house, we’ve maintained complete control over the performance, reliability, and durability of our product, setting a new benchmark in the BMW tuning aftermarket.
While our design and development are proudly rooted in the USA, we leverage global manufacturing facilities to bring our products to life. This approach allows us to maintain our rigorous quality standards while benefiting from the efficiency and cost-effectiveness of global production capabilities. By combining the best of American design with top-tier international manufacturing, we can offer our customers a product that excels in both performance and value, ensuring that our solutions remain competitive in the market without compromising on quality.
In addition to our hardware, our software was also fully developed in-house using the latest advancements in mobile and IoT technology. By keeping the development process internal, we ensured that every detail of the software was meticulously crafted, tested, and perfected by our team. This hands-on approach allows us to maintain complete control over the user experience and performance, delivering an app that seamlessly integrates with our wireless adapter and meets the high expectations of BMW enthusiasts. Our commitment to in-house development underscores our dedication to quality and innovation in every aspect of our product.
QUESTIONS?
FAQ
Yes, for most applications, a Stage 1 and Stage 2 performance tune are included within the ByteFlasher app.
Both Android and iOS are supported by our ByteFlasher app.
Yes, the mobile app requires you to login periodically. It also checks for software updates as needed.
If your mobile device has an active SIM card, then no. If your mobile device requires a Wi-Fi connection to access the internet, then yes.
Not yet, but this is on our roadmap as a future feature.
It is highly recommended to have a battery charger for the first flash which could take several minutes. After the first flash, however, flashes are much faster and a charger is generally not necessary.
No, everything is done via the OBD2 port.
No, you only need a mobile device with the ByteFlasher app and wireless adapter to tune.
Yes, but we do not recommend leaving it connected long-term due to the slight draw on the battery.
Each vehicle license allows you to tune one vehicle indefinitely. If you want to tune additional vehicles, you’ll need to purchase additional vehicle licenses. You only need to purchase a single ByteTuner wireless adapter as it can store multiple vehicle licenses.
Yes, assuming you’ve purchased additional vehicle licenses. Your account can be linked with any number of vehicle licenses.
Vehicle licenses are currently non-transferable.
This can happen on rare occasion, but typically the DME can be recovered by flashing again. Temporarily disconnect the battery for a few minutes. You can then attempt to start the flashing process again.
Email info@renovelo.com and someone from our support staff can help you.
Reviews
There are no reviews yet.